Posted by Dave on February 23, 19101 at 01:01:13:
I've recently obtained 2 Micropolis 3391WD 9GB SCSI drives (they were really cheap!), but I can't seem to configure either of them to work with either an on-board 7895 adaptor (on an Microstar 6120 Mobo) or with an Adaptec 19160 RAID adaptor. I've also got access to IBM 9 & 18 GB Ultrastar drives, and if I connect either of these to either of the SCSI cards/adaptors, these work with no problems.
I've set the SCSI id's on each of the Micropolis drives as per the jumper settings listed on the drive and on this website, but to no avail. Help! What am I doing/not doing wrong/right?